ZAlMg10 ZL301 - GB /T 1173-2013

Grade	ZAlMg10
China ISC	ZL301
Corresponding Standard	GB /T 1173-2013 Casting Aluminum Alloy
Classification	Aluminum and Aluminum Alloys
Properties	Strength Corrosion Resistance
Density	2.55 g/cm³

ZAlMg10 Chemical Element Composition Content (%)

	Component	Fe	Si	Be	Mn	Ni	Cu	Ti	Zr	Pb	Zn	Sn	Mg	Other Total	More
S-砂型铸造；J-金属型铸造	Minimum Value	-	-	-	-	-	-	-	-	-	-	-	9.5	-	Al:余量
S-砂型铸造；J-金属型铸造	Maximum Value	0.3	0.3	0.07	0.15	0.05	0.1	0.15	0.2	0.05	0.15	0.05	11	1	Al:余量

"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.

ZAlMg10 Mechanical Properties

casting process	Mark	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Elongation or Extension Rate δ %	Hardness HBW
S、J、R	ZL301-T4	T4 - Solution Heat Treatment + Natural Aging	≥280	≥9	≥60

ZAlMg10 Corresponding Standards(Same grade name, different standards)

1	GB /T 1173-2013
	ZAlMg10 ZL301
2	HB 962-2001
	ZAlMg10 ZL301

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!