C50E 1.1206 - NF EN 10083-2-2006

Grade	C50E
	1.1206
Corresponding Standard	NF EN 10083-2-2006 Tempered Non-Alloy Structural Steel
Classification	Carbon Steel

C50E Chemical Element Composition Content (%)

Component	C ^①	Si	Mn	P	S ^②	Cr	Ni	Mo	More
Minimum Value	0.47	-	0.6	-	-	-	-	-	Cr+Mo+Ni≤0.63 ①
Maximum Value	0.55	0.4	0.9	0.03	0.035	0.4	0.4	0.1	Cr+Mo+Ni≤0.63 ①

C50E Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Reduction of Area ψ %	Hardness HBW
Steel: d ≤ 16mm; t ≤ 8mm	Quenching + Tempering (+QT)	750~900	≥520	≥13	≥30	HRC ① ≥56
Steel: 16mm ≤ d ≤ 40mm; 8mm ≤ t ≤ 20mm	Quenching + Tempering (+QT)	700~850	≥460	≥15	≥35	HRC ① ≥56
Steel: 40mm ≤ d ≤ 100mm; 20mm ≤ t ≤ 60mm	Quenching + Tempering (+QT)	650~800	≥400	≥16	≥40	HRC ① ≥56
Steel: d ≤ 16mm; t ≤ 16mm	Normalizing (+N)	≥650	≥355	≥13
Steel: 16mm ≤ d ≤ 100mm; 16mm ≤ t ≤ 100mm	Normalizing (+N)	≥610	≥320	≥14
Steel: 100mm ≤ d ≤ 250mm; 100mm ≤ t ≤ 250mm	Normalizing (+N)	≥590	≥290	≥14
Steel:	Processed to a Certain Shearability (+S)					≤255
Steel:	Softening Annealing (+A)					≤217

Approximate Comparison Table High-Quality Carbon Structural Steel

China

Taiwan, China

Japan

South Korea

United States

International Organization for Standardization

Germany

France

Russia

Sweden

United Kingdom

ISC

CNS

JIS

ASTM/AISI

UNS

ISO

DIN EN/DIN

W-Nr.

NF EN/NF

GOST

BS EN/BS

U20502

S50C

SM50C

1050

G10500

C50E4

C50E
Ck53

1.1210

C50E

1674

C50E
080M50

C50E Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!