38Cr2 1.7003 38C2 - NF EN 10083-3-2006

Grade	38Cr2
	1.7003
Old Grade
Corresponding Standard	NF EN 10083-3-2006 Tempered alloy structural steel
Classification	Alloy Steel

38Cr2 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr
Minimum Value	0.35	-	0.5	-	-	0.4
Maximum Value	0.42	0.4	0.8	0.025	0.035	0.6

38Cr2 Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Reduction of Area ψ %	Hardness HBW	Impact Energy Absorption KV2 J
Steel: d ≤ 16mm; t ≤ 8mm	Quenching + Tempering (+QT)	800~950	≥550	≥14	≥35
Steel: 16mm ≤ d ≤ 40mm; 8mm ≤ t ≤ 20mm	Quenching + Tempering (+QT)	700~850	≥450	≥15	≥40		≥35
Steel: 40mm ≤ d ≤ 100mm; 20mm ≤ t ≤ 60mm	Quenching + Tempering (+QT)	600~750	≥350	≥17	≥45		≥35
Steel:	Processed to a Certain Shearability (+S)					≤255
Steel:	Softening Annealing (+A)					≤207

38Cr2 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!