25CrMo4 1.7218 25CD4 - NF EN 10083-3-2006

Grade	25CrMo4
	1.7218
Old Grade
Corresponding Standard	NF EN 10083-3-2006 Tempered alloy structural steel
Classification	Alloy Steel

25CrMo4 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S ^①	Cr	Mo
Minimum Value	0.22	-	0.6	-	-	0.9	0.15
Maximum Value	0.29	0.4	0.9	0.025	0.035	1.2	0.3

25CrMo4 Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Reduction of Area ψ %	Hardness HBW	Impact Energy Absorption KV2 J
Steel: d ≤ 16mm; t ≤ 8mm	Quenching + Tempering (+QT)	900~1100	≥700	≥12	≥50
Steel: 16mm ≤ d ≤ 40mm; 8mm ≤ t ≤ 20mm	Quenching + Tempering (+QT)	800~950	≥600	≥14	≥55		≥50
Steel: 40mm ≤ d ≤ 100mm; 20mm ≤ t ≤ 60mm	Quenching + Tempering (+QT)	700~850	≥450	≥15	≥60		≥50
Steel: 100mm ≤ d ≤ 160mm; 60mm ≤ t ≤ 100mm	Quenching + Tempering (+QT)	650~800	≥400	≥16	≥60		≥45
Steel:	Processed to a Certain Shearability (+S)					≤255
Steel:	Softening Annealing (+A)					≤212

25CrMo4 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!