35NiCr6 1.5815 - NF EN 10083-3-2006

Grade	35NiCr6
	1.5815
Corresponding Standard	NF EN 10083-3-2006 Steels for Quenching and Tempering - Part 3: Technical Delivery Conditions for Alloy Steels
Classification	Alloy Steel

35NiCr6 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S ^①	Cr	Ni
Minimum Value	0.3	-	0.6	-	-	0.8	1.2
Maximum Value	0.37	0.4	0.9	0.025	0.025	1.1	1.6

35NiCr6 Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Reduction of Area ψ %	Hardness HBW	Impact Energy Absorption KV2 J
Steel: d ≤ 16mm; t ≤ 8mm	Quenching + Tempering (+QT)	880~1080	≥740	≥12	≥40
Steel: 16mm ≤ d ≤ 40mm; 8mm ≤ t ≤ 20mm	Quenching + Tempering (+QT)	880~1080	≥740	≥14	≥40		≥35
Steel: 40mm ≤ d ≤ 100mm; 20mm ≤ t ≤ 60mm	Quenching + Tempering (+QT)	780~980	≥640	≥15	≥40		≥35
Steel:	Processed to a Certain Shearability (+S)					①
Steel:	Softening Annealing (+A)					≤223

35NiCr6 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!