30NiCrMo16-6 1.6747 - NF EN 10083-3-2006

Grade	30NiCrMo16-6
	1.6747
Corresponding Standard	NF EN 10083-3-2006 Tempered alloy structural steel
Classification	Alloy Steel

30NiCrMo16-6 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S ^①	Cr	Ni	Mo
Minimum Value	0.26	-	0.5	-	-	1.2	3.3	0.3
Maximum Value	0.33	0.4	0.8	0.025	0.025	1.5	4.3	0.6

30NiCrMo16-6 Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Reduction of Area ψ %	Hardness HBW	Impact Energy Absorption KV2 J
Steel: d ≤ 16mm; t ≤ 8mm	Quenching + Tempering (+QT)	1080~1230	≥880	≥10	≥45
Steel: 16mm ≤ d ≤ 40mm; 8mm ≤ t ≤ 20mm	Quenching + Tempering (+QT)	1080~1230	≥880	≥10	≥45		≥35
Steel: 40mm ≤ d ≤ 100mm; 20mm ≤ t ≤ 60mm	Quenching + Tempering (+QT)	1080~1230	≥880	≥10	≥45		≥35
Steel: 100mm ≤ d ≤ 160mm; 60mm ≤ t ≤ 100mm	Quenching + Tempering (+QT)	900~1050	≥790	≥11	≥50		≥35
Steel: 160mm ≤ d ≤ 250mm; 100mm ≤ t ≤ 160mm	Quenching + Tempering (+QT)	900~1050	≥880	≥11	≥50		≥35
Steel:	Processed to a Certain Shearability (+S)					①
Steel:	Softening Annealing (+A)					≤270

30NiCrMo16-6 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!