Grade 30CrNiMo8
European Standard Steel Grade 1.6580
Corresponding Standard EN 10083-3-2006
Classification Alloy Steel
30CrNiMo8 Chemical Element Composition Content (%)
Component C Si Mn P S Cr Ni Mo
Minimum Value 0.26 - 0.5 - - 1.8 1.8 0.3
Maximum Value 0.34 0.4 0.8 0.025 0.035 2.2 2.2 0.5
• Elements not quoted in this table shall not be intentionally added to the steel without the agreement of the purchaser, other than for the purpose of finishing the heat and for boron to have its effect on the hardenability. All reasonable precautions shall be taken to prevent the addition of such elements from scrap or other material used in the manufacture which affect the hardenability, mechanical properties and applicability.
1 Approximate Comparison Table
China Japan International Organization for Standardization Germany European Standard
GB ISC JIS ISO DIN EN/DIN W-Nr. EN Numerical Grade
30Cr2Ni2Mo A50300 SNCM431 30CrNiMo8 30CrNiMo8 1.6580 30CrNiMo8 1.6580
2 Approximate Comparison Table structural alloy steel
China Japan International Organization for Standardization Germany France European Standard Russia United Kingdom
GB JIS ISO DIN EN/DIN NF EN/NF EN Numerical Grade GOST BS EN/BS
30Cr2Ni2Mo SNCM431 31CrNiMo8 30CrNiMo8 30CND8 30CrNiMo8 1.6580 3KH3M3F 823M30
3 Approximate Comparison Table
Japan United States Germany France European Standard Russia United Kingdom
JIS ASTM/AISI UNS DIN EN/DIN W-Nr. NF EN/NF EN Numerical Grade GOST BS EN/BS
SDK62
SDK7
H10
H12
T20810 30CrMoV12
45WCrV7
X30WCrV5-3
X30WCrV9-3
X32CrMoV3-3
1.2365 32CDV12-28
32CrMoV12-28
Z35CWDV5
30CrMoV12-11
30CrNiMo8
32CrMoV12-28
-
1.6580
1.2365
3Х3М3Ф
3KH3M3F
2365
BH10
BH12
4 Approximate Comparison Table
Japan United States Germany France European Standard Russia United Kingdom
JIS ASTM AISI DIN EN/DIN W-Nr. NF EN/NF EN Numerical Grade GOST BS EN/BS
SKD62
SKD7
H10
H12
T20810 X32CrMoV3-3
45WCrV7
X30WCrV5-3
X30WCrV9-3
30CrMoV12
1.2365 32CDV12-28
32CrMoV12-28
Z35CWDV5
32CrMoV12-28
30CrNiMo8
30CrMoV12-11
1.2365
1.6580
3Х3М3Ф
3KH3M3F
2365
BH10
BH12

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!