Grade C35E
European Standard Steel Grade 1.1181
Corresponding Standard EN 10269-2006
Steels and Nickel Alloys for Fasteners with Specified Elevated and/or Low Temperature Properties
Classification Carbon Steel
Density 7.85 g/cm3
C35E Chemical Element Composition Content (%)
Component C Si Mn P S Cr Ni Mo More
Minimum Value 0.32 - 0.5 - - - - - Cr+Mo+Ni: ≤0.63
Maximum Value 0.39 0.4 0.8 0.03 0.035 0.4 0.4 0.1
①Elements not listed in this table may not be intentionally added to the steel without the agreement of the purchaser except for finishing the cast. All appropriate precautions are to be taken to avoid the addition of such elements from scrap and other materials used in production which would impair mechanical properties and the usefulness of the steel.
1 Approximate Comparison Table Non-Alloy Steel for Quenching and Tempering
China Japan International Organization for Standardization European Standard
GB JIS ISO EN Numerical Grade
35 S35C C35E C35E 1.1181
2 Approximate Comparison Table High-Quality Carbon Structural Steel
China Japan United States International Organization for Standardization Germany France European Standard Russia Sweden United Kingdom
GB JIS ASTM ISO DIN EN/DIN NF EN/NF EN Numerical Grade GOST SS BS EN/BS
35 S35C 1035 C35E4 Ck35 XC38
XC38H1
C35E 1.1181 35 1572 080M36
CFS6
3 Approximate Comparison Table High-Quality Carbon Structural Steel
China United States International Organization for Standardization European Standard
GB ASTM/AISI ISO EN Numerical Grade
35Mn
(GB/T 699-2015)
1037
(ASTM A29/A29M:2005)
C35E4
(ISO 683-18:1996)
C35E
(EN 10083-1:1991+A1:1996)
(EN 10084:1998)
1.1181

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!