40CrMoV4-6 1.7711 - EN 10269-1999

Grade	40CrMoV4-6
European Standard Steel Grade	1.7711
Corresponding Standard	EN 10269-2006 Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
Classification	Alloy Steel
Density	7.85 g/cm³

40CrMoV4-6 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Mo	V	Al
Minimum Value	0.36	-	0.45	-	-	0.9	0.5	0.25	-
Maximum Value	0.44	0.4	0.85	0.025	0.03	1.2	0.65	0.35	0.015

①Elements not listed in this table may not be intentionally added to the steel without the agreement of the purchaser except for finishing the cast. All appropriate precautions are to be taken to avoid the addition of such elements from scrap and other materials used in production which would impair mechanical properties and the usefulness of the steel.

Approximate Comparison Table Structural Alloy Steel

China	Japan	United States	Germany		European Standard		United Kingdom
GB	JIS	ASTM	DIN EN/DIN	W-Nr.	EN	Numerical Grade	BS EN/BS
35CrMoV	SNB16	A193 B16	40CrMoV4-6	1.7711	40CrMoV4-6	1.7711	40CrMoV4-6

40CrMoV4-6 Corresponding Standards(Same grade name, different standards)

1	EN 10269-2006
	40CrMoV4-6 1.7711
2	EN 10269-2013
	40CrMoV4-6 1.7711
3	NF EN 10269-1999
	40CrMoV4-6 1.7711
4	DIN EN 10269-2014
	40CrMoV4-6 1.7711

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!