中文版
Home Material DIN 17860-2010
简体 | 繁體
Grade TiAl5Sn2.5
Germany W-Nr. 3.7115
Corresponding Standard DIN 17860-2010
Titanium and titanium alloy strip, shee and t plate - Technical condition of delivery
Classification Titanium and Titanium Alloys
Properties Corrosion Resistance
Density 4.43 g/cm3
TiAl5Sn2.5 Chemical Element Composition Content (%)
Component Fe C N Al Sn H O Other Individual Other Total More
Minimum Value - - - 4.5 2 - - - - Ti:余量
Maximum Value 0.5 0.08 0.05 5.5 3 0.02 0.2 0.1 0.4
"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.
TiAl5Sn2.5 Mechanical Properties
condition Tensile Strength
σb
Mpa 		Yield Point
σs
Mpa 		Elongation or Extension Rate
δ
% 		Hardness
HBW 		Impact Energy Absorption
KV2
J
Plate stock t ≤ 6 ≥830 ≥780 ≥10(A50) ≈300 -
Plate 6<t≤40 ≥830 ≥780 ≥10(A50)；≥8(A5) ≈300 -
Plate 40<t≤80 ≥790 ≥760 ≥10(A50)；≥8(A5) ≈300 -
1 Approximate Comparison Table Processing Titanium and Titanium Alloys
China United States International Organization for Standardization Germany France Russia United Kingdom
GB ASTM UNS ISO Numerical Grade DIN EN/DIN W-Nr. NF EN/NF GOST BS EN/BS
TA7 Grade 6 R54520 Ti-5Al-2.5Sn R54520 TiAl5Sn2 3.7115
R54520 		T-A5E
R54520 		ВТ5-1 Ti-5Al-2.5Sn
R54520
2 Approximate Comparison Table Processing Titanium and Titanium Alloys
Japan United States Germany France Russia United Kingdom
JIS ASTM/AISI W-Nr. NF EN/NF GOST BS EN/BS
KS-5-2.5
SAT-525 		5Al-2.5Sn
Grade6 		3.7114
3.7115 		Ti-P.65 ВТ5-1
VT5-1 		IMI317
TiAl5Sn2.5 Corresponding Standards(Same grade name, different standards)
1 DIN 17862-2012
TiAl5Sn2.5 3.7115
2 DIN 17851-1990
TiAl5Sn2.5 3.7115
3 DIN 17860-2010
TiAl5Sn2.5 3.7115

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!