36Mn4 1.0561 - DIN 17204-1990 - H2ABC

中文版

Grade	36Mn4
Germany W-Nr.	1.0561
Corresponding Standard	DIN 17204-1990
Classification	Alloy Steel

36Mn4 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S
Minimum Value	0.32	-	0.9	-	-
Maximum Value	0.4	0.4	1.2	0.04	0.04

36Mn4 Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Reduction of Area ψ %	Hardness HBW	Impact Energy Absorption KV2 J
Hot drawn, cold drawn pipes	Annealing					≤217
Pipe material t≤16	Normalizing (N)	600~750	≥360	≥16(long.)；≥14(tr.)
Pipe material 16<t≤40	Normalizing (N)	550~700	≥340	≥24(long.)；≥22(tr.)
Pipe material 40<t≤80	Normalizing (N)	500~650	≥320	≥17(long.)；≥15(tr.)
Pipes t≤8	Quenching + Tempering (V)	800~1000	≥550	≥13(long.)；≥11(tr.)	≥40		-
Pipes; 8< t≤20	Quenching + Tempering (V)	700~900	≥450	≥15(long.)；≥13(tr.)	≥45
Pipes; 20< t≤50	Quenching + Tempering (V)	600~1000	≥400	≥15(long.)；≥13(tr.)	≥50

Approximate Comparison Table

China		United States		Germany		France	Russia	United Kingdom
GB	ISC	ASTM/AISI	UNS	DIN EN/DIN	W-Nr.	NF EN/NF	GOST	BS EN/BS
35Mn	U21352	1037	G10370	36Mn4	1.0561	35M5	35г	080A35

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!