C60 1.0601 - DIN 17204-1990

C60 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S
Minimum Value	0.57	-	0.6	-	-
Maximum Value	0.65	0.4	0.9	0.045	0.045

C60 Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Reduction of Area ψ %	Hardness HBW
Hot drawn, cold drawn pipes	Annealing					≤241
Pipe material t≤16	Normalizing (N)	720~900	≥390	≥13(long.)；≥11(tr.)
Pipe material 16<t≤40	Normalizing (N)	700~880	≥370	≥14(long.)；≥12(tr.)
Pipe material 40<t≤80	Normalizing (N)	670~850	≥360	≥14(long.)；≥12(tr.)
Pipes t≤8	Quenching + Tempering (V)	850~1050	≥580	≥11(long.)；≥9(tr.)	≥25
Pipes; 8< t≤20	Quenching + Tempering (V)	800~1000	≥520	≥13(long.)；≥11(tr.)	≥30
Pipes; 20< t≤50	Quenching + Tempering (V)	750~950	≥450	≥14(long.)；≥12(tr.)	≥35
Pipe; 50<t≤80	Quenching + Tempering (V)	710~910	≥420	≥14(long.)；≥12(tr.)	≥35

1 Approximate Comparison Table

China	Japan	United States	International Organization for Standardization	Germany	European Standard		Russia	United Kingdom
GB	JIS	ASTM	ISO	DIN EN/DIN	EN	Numerical Grade	GOST	BS EN/BS
60	S58C	1060	C60	C60	C60	1.0601	60 60G	070M60

2 Approximate Comparison Table

China	Japan	United States	International Organization for Standardization	Germany		France	Russia	United Kingdom
GB	JIS	ASTM/AISI	ISO	DIN EN/DIN	W-Nr.	NF EN/NF	GOST	BS EN/BS
60Mn	SWRH62B	1060 1061	Type SC Type DC	C60	1.0601	C60	60г	C60 080A57 080A62

C60 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!