P195GH 1.0348 - NF EN 10216-2-2007

Grade	P195GH
	1.0348
Corresponding Standard	NF EN 10216-2-2007 Pressurized Seamless Steel Tubes for High Temperatures
Classification	Carbon Steel

P195GH Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	Cu ^②	Mo	Ti ^③	V ^③	Nb ^③	Al ^①	More
Minimum Value	-	-	-	-	-	-	-	-	-	-	-	-	0.02	Cr+Cu+Mo+Ni ≤ 0.7
Maximum Value	0.13	0.35	0.7	0.025	0.02	0.3	0.3	0.3	0.08	0.04	0.02	0.01	-	Cr+Cu+Mo+Ni ≤ 0.7

◎ Elements not included in this table shall not be intentionally added to the steel without the agreement of the purchaser, except for elements which may be added for finishing the cast. All appropriate measures shall be taken to prevent the addition of undesirable elements from scrap or other materials used in the steel making process.

P195GH Mechanical Properties

thickness T mm	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Impact Energy Absorption KV2 J
Steel: T ≤ 16	320~440	≥195	l ≥ 27；t≥25	0℃：l ≥ 40,t≥27 ; -10℃：l ≥ 28

◎ l-longitudinal；t-transverse

P195GH Corresponding Standards(Same grade name, different standards)

1	EN 10216-2-2007
	P195GH 1.0348
2	NF EN 10216-2-2007
	P195GH 1.0348
3	NF EN 10217-2-2005
	P195GH
4	EN 10217-2-2019
	P195GH 1.0348
5	EN 10216-2-2024
	P195GH 1.0348

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!