P235GH 1.0345 - NF EN 10216-2-2007

Grade	P235GH
	1.0345
Corresponding Standard	NF EN 10216-2-2007 Pressurized Seamless Steel Tubes for High Temperatures
Classification	Carbon Steel

P235GH Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	Cu ^②	Mo	Ti ^③	V ^③	Nb ^③	Al ^①	More
Minimum Value	-	-	-	-	-	-	-	-	-	-	-	-	0.02	Cr+Cu+Mo+Ni ≤ 0.7
Maximum Value	0.16	0.35	1.2	0.025	0.02	0.3	0.3	0.3	0.08	0.04	0.02	0.01	-	Cr+Cu+Mo+Ni ≤ 0.7

◎ Elements not included in this table shall not be intentionally added to the steel without the agreement of the purchaser, except for elements which may be added for finishing the cast. All appropriate measures shall be taken to prevent the addition of undesirable elements from scrap or other materials used in the steel making process.

P235GH Mechanical Properties

thickness T mm	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Impact Energy Absorption KV2 J
Steel: T ≤ 16	360~500	≥235	l ≥ 25；t≥23	0℃：l ≥ 40,t≥27 ; -10℃：l ≥ 28
Steel: 16 < T ≤ 40	360~500	≥225	l ≥ 25；t≥23	0℃：l ≥ 40,t≥27 ; -10℃：l ≥ 28
Steel: 40 < T ≤ 60	360~500	≥215	l ≥ 25；t≥23	0℃：l ≥ 40,t≥27 ; -10℃：l ≥ 28

◎ l-longitudinal；t-transverse

P235GH Corresponding Standards(Same grade name, different standards)

1	EN 10028-2-2009
	P235GH 1.0345
2	EN 10216-2-2007
	P235GH 1.0345
3	EN 10273-2000
	P235GH 1.0345
4	ISO 9328-2-2018
	P235GH
5	EN 10222-2-2017
	P235GH 1.0345
6	EN 10028-2-2017
	P235GH 1.0345
7	NF EN 10216-2-2007
	P235GH 1.0345
8	NF EN 10217-2-2005
	P235GH
9	NF EN 10253-2-2007
	P235GH 1.0345
10	EN 10217-2-2019
	P235GH 1.0345
11	EN 10217-5-2019
	P235GH 1.0345
12	EN 10216-2-2024
	P235GH 1.0345

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!