GK-AlSi11 3.2211.02 - DIN 1725-2-1986

Grade	GK-AlSi11
Germany W-Nr.	3.2211.02
Corresponding Standard	DIN 1725-2-1986 Aluminium alloy, casting alloys, sand castings, gravity die castings, pressure die castings, investment castings
Classification	Aluminum and Aluminum Alloys
Density	2.65 g/cm³

GK-AlSi11 Chemical Element Composition Content (%)

Component	Fe	Si	Mn	Cu	Ti	Zn	Mg	Other Individual	Other Total	More
Minimum Value	-	10	-	-	-	-	0.001	-	-	Al:余量
Maximum Value	0.18	11.8	0.03	0.03	0.15	0.07	0.4	0.03	0.1	Al:余量

"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.

GK-AlSi11 Mechanical Properties

condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
Cold-cast ingot; Metal mold castings	170~230	80~110	7~13	45~65

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!