GF-AlMg3Si wa 3.3241.63 - DIN 1725-2-1986

Grade	GF-AlMg3Si wa
Germany W-Nr.	3.3241.63
Corresponding Standard	DIN 1725-2-1986 Aluminium alloy, casting alloys, sand castings, gravity die castings, pressure die castings, investment castings
Classification	Aluminum and Aluminum Alloys
Density	2.7 g/cm³

GF-AlMg3Si wa Chemical Element Composition Content (%)

Component	Fe	Si	Mn	Cu	Ti	Zn	Mg	Other Individual	Other Total	More
Minimum Value	-	0.9	0.001	-	0.001	-	2.5	-	-	Al:余量
Maximum Value	0.5	1.3	0.4	0.05	0.2	0.1	3.5	0.05	0.15	Al:余量

"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.

GF-AlMg3Si wa Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
Precision Castings	Solution Heat Treatment + Artificial Aging	200~280	120~160	2~8	60~80

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!