G-AlMg5 3.3561.01 - DIN 1725-2-1986

Grade	G-AlMg5
Germany W-Nr.	3.3561.01
Corresponding Standard	DIN 1725-2-1986 Aluminium alloy, casting alloys, sand castings, gravity die castings, pressure die castings, investment castings
Classification	Aluminum and Aluminum Alloys
Properties	Corrosion Resistance
Density	2.6 g/cm³

G-AlMg5 Chemical Element Composition Content (%)

Component	Fe	Si	Mn	Cu	Ti	Zn	Mg	Other Individual	Other Total	More
Minimum Value	-	-	0.001	-	0.001	-	4.5	-	-	Al:余量
Maximum Value	0.5	0.5	0.4	0.05	0.2	0.1	5.5	0.05	0.15	Al:余量

"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.

G-AlMg5 Mechanical Properties

condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
Sand casting	160~220	100~120	3~8	55~70

Approximate Comparison Table Aluminium and Aluminium Alloy

Japan	International Organization for Standardization	Germany		European Standard
JIS	ISO	DIN EN/DIN	W-Nr.	EN	Numerical Grade
AC7A ADC5 Al-Mg6	AlMg5	G-AlMg5	3.3561	ENAC-AlMg5	ENAC-51300

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!