GD-AlMg9 3.3292.05 - DIN 1725-2-1986

Grade	GD-AlMg9
Germany W-Nr.	3.3292.05
Corresponding Standard	DIN 1725-2-1986 Aluminium alloy, casting alloys, sand castings, gravity die castings, pressure die castings, investment castings
Classification	Aluminum and Aluminum Alloys
Properties	Corrosion Resistance
Density	2.6 g/cm³

GD-AlMg9 Chemical Element Composition Content (%)

Component	Fe	Si	Mn	Cu	Ti	Zn	Mg	Other Individual	Other Total	More
Minimum Value	-	0.01	0.2	-	-	-	7	-	-	Al:余量
Maximum Value	1	2.5	0.5	0.05	0.15	0.1	10	0.05	0.15	Al:余量

"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.

GD-AlMg9 Mechanical Properties

condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
Die-casting (GD); cast state	200~300	140~220	1~5	70~100

Approximate Comparison Table Aluminium and Aluminium Alloy

Japan	United States		International Organization for Standardization	Germany		France	European Standard		Russia	United Kingdom
JIS	ASTM	UNS	ISO	DIN EN/DIN	W-Nr.	NF EN/NF	EN	Numerical Grade	GOST	BS EN/BS
Al-Mg10	518.0	A05200	AlMg10 AlMg9	GD-AlMg9	3.3292	A-G10SY4	ENAC-AlMg9	ENAC-51200	AMg10	LM10

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!