SINT-D39 - DIN 30910(4)-2004

Grade	SINT-D39
Corresponding Standard	DIN 30910(4)-2004 Sintered metal materials – Sintered-material specifications – Part 4: Materials for structural parts
Classification	Alloy Steel
Density	6.9 g/cm³

SINT-D39 Chemical Element Composition Content (%)

	Component	C	Ni	Cu	Mo	More
允许范围	Minimum Value	0.3	1	1	-	Fe:余量；其他＜2
	Maximum Value	0.9	5	3	0.6
	Nominal Value	-	-	-	-

	Component	C	Ni	Cu	Mo	More
参考举例	Minimum Value	-	-	-	-	Fe:余量；其他＜0.5
	Maximum Value	-	-	-	-
	Nominal Value	0.5	4	1.5	0.5

SINT-D39 Mechanical Properties

condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
Allowable range				＞120
Reference example	560	380	2	160

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!