SINT-D00 - DIN 30910(4)-2004

Grade	SINT-D00
Corresponding Standard	DIN 30910(4)-2004 Sintered metal materials – Sintered-material specifications – Part 4: Materials for structural parts
Classification	Other metal materials
Density	6.9 g/cm³

SINT-D00 Chemical Element Composition Content (%)

	Component	C	Cu	Other Total	More
允许范围	Minimum Value	-	-	-	Fe:余量
允许范围	Maximum Value	0.3	1	2	Fe:余量

	Component	Other Total	More
参考举例	Minimum Value	-	Fe:余量
参考举例	Maximum Value	0.5	Fe:余量

"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.

SINT-D00 Mechanical Properties

condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
Allowable range				＞45
Reference example	170	80	8	50

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!