中文版
Home Material DIN 17672-1-1983
简体 | 繁體
Grade CuZn36Pb3
Germany W-Nr. 2.0375
Corresponding Standard DIN 17672-1-1983
Wrought copper and copper alloys bars；Properties.
Classification Copper and Copper Alloys
Density 8.5 g/cm3
CuZn36Pb3 Chemical Element Composition Content (%)
Component Fe Ni Cu Pb Al Sn Other Total More
Minimum Value - - 60 2.5 - - - Zn:余量
Maximum Value 0.3 0.3 62 3.5 0.05 0.2 0.2
"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.
CuZn36Pb3 Mechanical Properties
diameter/thickness
d
mm		 Mark
Heat Treatment or Condition
Tensile Strength
σb
Mpa 		Yield Point
σs
Mpa 		Elongation or Extension Rate
δ
% 		Hardness
HBW
Round, Square, Hexagonal Bars, Flats; Specifications as per agreement 2.0375.08 Extrusion or Hot Forging P (.08) No specification No specification No specification No specification
Rounds, squares, hexagons; specification by agreement 2.0375.20 Cold Drawing zh (.20) No specification No specification No specification No specification
Round bar; d≤10 2.0375.10 Soft F34 (.10) ≥340 ≤250 ≥35(A5) ≈85
Square bar, hexagonal bar; d≤8 2.0375.10 Soft F34 (.10) ≥340 ≤250 ≥35(A5) ≈85
Flat bar; d≤6 2.0375.10 Soft F34 (.10) ≥340 ≤250 ≥35(A5) ≈85
Round bars; d＜40 2.0375.26 Half-Hard F40 (.26) ≥400 ≥250 ≥18(A5) ≈115
Square bars, hexagonal bars; d＜35 2.0375.26 Half-Hard F40 (.26) ≥400 ≥250 ≥18(A5) ≈115
Flat material; d＜6 2.0375.26 Half-Hard F40 (.26) ≥400 ≥250 ≥18(A5) ≈115
Round material; d＜12 2.0375.30 Hard F46 (.30) ≥460 ≥350 ≥12(A5) ≈140
Square, hexagonal profiles; d＜10 2.0375.30 Hard F46 (.30) ≥460 ≥350 ≥12(A5) ≈140
Flat material; d＜4 2.0375.30 Hard F46 (.30) ≥460 ≥350 ≥12(A5) ≈140
1 Approximate Comparison Table brass
China United States International Organization for Standardization Germany European Standard Russia United Kingdom
GB ISC ASTM UNS ISO Numerical Grade DIN EN/DIN W-Nr. EN Numerical Grade GOST Commercial Grade BS EN/BS
HPb62-3 C36000 62Cu-35Zn-3Pb C36000 CuZn36Pb3 C36000 CuZn36Pb3 C36000
2.0375 		CuZn36Pb3 CW603N ЛС62-3 CZ124 C36000
2 Approximate Comparison Table Cupper and cupper alloy
Germany European Standard
DIN EN/DIN W-Nr. EN Numerical Grade
CuZn36Pb3 2.0375 CuZn36Pb3 CW603N
CuZn36Pb3 Corresponding Standards(Same grade name, different standards)
1 EN 12166-1998
CuZn36Pb3 CW603N
2 EN 12166-2016
CuZn36Pb3 CW603N
3 DIN 17672-1-1983
CuZn36Pb3 2.0375
4 DIN 17671-1-1983
CuZn36Pb3 2.0375
5 DIN EN 12166-2016
CuZn36Pb3 CW603N
6 DIN EN 12166-1998
CuZn36Pb3 CW603N
7 DIN 17660-1983
CuZn36Pb3 2.0375
8 EN 12167-2024
CuZn36Pb3 CW603N
9 DIN EN 12449-2019
CuZn36Pb3 CW603N
10 EN 12449-2023
CuZn36Pb3 CW603N

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!