40CrMoV4-6 1.7711 - NF EN 10269-1999

Grade	40CrMoV4-6
	1.7711
Corresponding Standard	NF EN 10269-1999 Steels and Nickel Alloys for Fasteners with Specified Elevated and/or Low Temperature Properties
Classification	Alloy Steel
Density	7.85 g/cm³

40CrMoV4-6 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Mo	V	Al
Minimum Value	0.36	-	0.45	-	-	0.9	0.5	0.25	-
Maximum Value	0.44	0.4	0.85	0.03	0.03	1.2	0.65	0.35	0.015

40CrMoV4-6 Mechanical Properties

diameter d mm	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Reduction of Area ψ %	Hardness HBW	Impact Energy Absorption KV2 J
-*	+A	-	-	-	-	≤241	-
d≤100**	+QT	850~1000	≥700	≥14	≥45	-	≥30
100＜d≤160**	+QT	850~1000	≥640	≥14	≥45	-	≥25

40CrMoV4-6 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!