St60-2 1.0543 - DIN 1652-1963

Grade	St60-2
Germany W-Nr.	1.0543
Corresponding Standard	DIN 1652-1963 Bright Non-Alloy Steel - Technical Delivery Conditions
Classification	Carbon Steel

St60-2 Chemical Element Composition Content (%)

Component	C	P	S	N ^*
Minimum Value	-	-	-	-
Maximum Value	-	0.06	0.05	0.01
Nominal Value	0.4	-	-	-

St60-2 Mechanical Properties

thickness t mm	Mark	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %
t≤5	St60-2 K	Cold Drawn and Without Heat Treatment (K)	800~1100	≥680	≥5
5<t≤10		Cold Drawn and Without Heat Treatment (K)	750~1050	≥600	≥5
10<t≤16		Cold Drawn and Without Heat Treatment (K)	700~1000	≥500	≥6
16<t≤25		Cold Drawn and Without Heat Treatment (K)	700~950	≥460	≥6
25<t≤40		Cold Drawn and Without Heat Treatment (K)	650~900	≥400	≥8
40<t≤80		Cold Drawn and Without Heat Treatment (K)	630~880	≥350	≥9
t＞80		Cold Drawn and Without Heat Treatment (K)	By Agreement	By Agreement	By Agreement
10<t≤16	St60-2 SH	Peeling and No Heat Treatment (SH)	600~720	≥340	≥15
16<t≤40		Peeling and No Heat Treatment (SH)	600~720	≥330	≥15
40<t≤100		Peeling and No Heat Treatment (SH)	600~720	≥320	≥15
t>100		Peeling and No Heat Treatment (SH)	≥800	By Agreement	By Agreement
t≤25	St60-2 K+G；St60-2 SH+G	Cold Drawn and Annealed (K+G) or Descaled and Annealed (SH+G)	570~720	≥300	≥15
25<t≤100		Cold Drawn and Annealed (K+G) or Descaled and Annealed (SH+G)	600~720	≥320	≥15
t>100		Cold Drawn and Annealed (K+G) or Descaled and Annealed (SH+G)	≥600	By Agreement	By Agreement
t≤100	St60-2 K+N；St60-2 SH+N	Cold Drawn and Normalized (K+N) or Pickled and Normalized (SH+N)	600~720	≥320	≥15
t>100		Cold Drawn and Normalized (K+N) or Pickled and Normalized (SH+N)	≥600	By Agreement	By Agreement

Approximate Comparison Table Carbon Structural Steel and Engineering Steel

China	International Organization for Standardization	Germany	France	European Standard		Russia	Sweden
GB	ISO	DIN EN/DIN	NF EN/NF	EN	Numerical Grade	GOST	SS
Q345C	FeE690	St60-2	A60-2	E335 Fe590-2①	1.0060	St5ps St5sp St6ps St6sp	1650-00 1650-01

St60-2 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!