C60 1.0601 - DIN 1652-1963

Grade	C60
Germany W-Nr.	1.0601
Corresponding Standard	DIN 1652-1963 Bright non-alloy steel - Technical delivery conditions
Classification	Carbon Steel

C60 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	N ^*
Minimum Value	0.57	0.15	0.5	-	-	-
Maximum Value	0.65	0.35	0.8	0.045	0.045	0.01

C60 Mechanical Properties

thickness d mm	Mark	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Reduction of Area ψ %	Hardness HBW
t≤5	C60 K	Cold Drawing + No Heat Treatment (K)	≥900	≥740	≥4
5<t≤10		Cold Drawing + No Heat Treatment (K)	≥850	≥660	≥5
10<t≤16		Cold Drawing + No Heat Treatment (K)	≥800	≥550	≥6
16<t≤25		Cold Drawing + No Heat Treatment (K)	≥800	≥510	≥6
25<t≤40		Cold Drawing + No Heat Treatment (K)	≥750	≥440	≥7
40<t≤100		Cold Drawing + No Heat Treatment (K)	≥700	≥330	≥8
t>100		Cold Drawing + No Heat Treatment (K)	≥700	≥330	≥8
All Sizes	C60 K+G；C60 SH+G	Cold Drawn + Softening Annealing (K+G) or Pickling + Softening (SH+G)					≤243HB30
t≤100	C60 K+N；C60 SH+N	Cold Drawing + Normalizing (K+N) or Pickling + Normalizing (SH+N)	700~850	≥390	≥15
t>100		Cold Drawing + Normalizing (K+N) or Pickling + Normalizing (SH+N)	By Agreement	By Agreement	By Agreement
t≤16	C60 K+V；C60 SH+V	Cold Drawn + Quenched and Tempered (K+V) or Descaled + Quenched and Tempered (SH+V)	850~1050	≥570	≥12	≥25
16<t≤40		Cold Drawn + Quenched and Tempered (K+V) or Descaled + Quenched and Tempered (SH+V)	750~900	≥490	≥14	≥30
40<t≤100		Cold Drawn + Quenched and Tempered (K+V) or Descaled + Quenched and Tempered (SH+V)	700~850	≥440	≥15	≥35
t>100		Cold Drawn + Quenched and Tempered (K+V) or Descaled + Quenched and Tempered (SH+V)	By Agreement	By Agreement	By Agreement	By Agreement

1 Approximate Comparison Table

China	Japan	United States	International Organization for Standardization	Germany	European Standard		Russia	United Kingdom
GB	JIS	ASTM	ISO	DIN EN/DIN	EN	Numerical Grade	GOST	BS EN/BS
60	S58C	1060	C60	C60	C60	1.0601	60 60G	070M60

2 Approximate Comparison Table

China	Japan	United States	International Organization for Standardization	Germany		France	Russia	United Kingdom
GB	JIS	ASTM/AISI	ISO	DIN EN/DIN	W-Nr.	NF EN/NF	GOST	BS EN/BS
60Mn	SWRH62B	1060 1061	Type SC Type DC	C60	1.0601	C60	60г	C60 080A57 080A62

C60 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!