中文版
Home Material DIN 17671-1-1983
简体 | 繁體
Grade SF-Cu
Germany W-Nr. 2.0090
Corresponding Standard DIN 17671-1-1983
Wrought copper and copper alloys tube；Properties.
Classification Copper and Copper Alloys
Density 8.9 g/cm3
SF-Cu Chemical Element Composition Content (%)
Component P Cu Other Total
Minimum Value 0.015 99.9 -
Maximum Value 0.04 - 0.5
"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.
SF-Cu Mechanical Properties
thickness
t
mm		 Mark
Heat Treatment or Condition
Tensile Strength
σb
Mpa 		Yield Point
σs
Mpa 		Elongation or Extension Rate
δ
% 		Hardness
HBW
Tube Material; t≥3 2.0090.10 Soft F20 (.10) 200~260 ≤110 ≥40 ≈55
Pipes; t＜3 2.0090.10 Soft F22 (.10) 220~270 ≤140 ≥40 ≈55
Tube Material; 0.5≤t＜10 2.0090.26 Semi-hard F25 (.26) 250~300 ≥150 ≥20 ≈80
Pipes; t<5 2.0090.30 Hard F29 (.30) ≥290 ≥250 ≥6 ≈95
Pipes; t＜3 2.0090.32 Tough-Hard F36 (.32) ≥360 ≥320 - ≈110
Pipe; wall thickness as per agreement 2.0090.08 Extrusion or Hot Forged Tubes P (.08) No specification No specification No specification No specification
Pipe; wall thickness as per agreement 2.0090.20 Rolling or stretching zh (.020) No specification No specification No specification No specification
1 Approximate Comparison Table Processing pure copper， silver copper
China Japan United States International Organization for Standardization Germany France European Standard Russia
GB ISC JIS ASTM UNS ISO Numerical Grade DIN EN/DIN W-Nr. NF EN/NF EN GOST
T2 T11050 C1100
Cu99.90 		99.90Cu C11000 Cu-FRHC C11000 ECu-57 C11000
2.0090 		Cu-FRHC
C11000 		Cu-FRHC М1
2 Approximate Comparison Table Cupper and cupper alloy
Germany European Standard Russia
DIN EN/DIN W-Nr. EN Numerical Grade GOST
SF-Cu 2.0090 Cu-DHP CW024A M1f
SF-Cu Corresponding Standards(Same grade name, different standards)
1 DIN 17672-1-1983
SF-Cu 2.0090
2 DIN EN 12163-1998
(SF-Cu) Cu-DHP CW024A (2.0090)
3 DIN 17671-1-1983
SF-Cu 2.0090
4 DIN 1787-1973
SF-Cu 2.0090

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!