Grade CuZn30
Germany W-Nr. 2.0265
Old Grade
Corresponding Standard DIN 17671-1-1983
Wrought copper and copper alloys tube;Properties.
Classification Copper and Copper Alloys
Density 8.5 g/cm3
CuZn30 Chemical Element Composition Content (%)
Component Fe Ni Cu Pb Al Sn Other Total More
Minimum Value - - 69 - - - - Zn:余量
Maximum Value 0.05 0.2 71 0.05 0.02 0.05 0.1
"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.
CuZn30 Mechanical Properties
thickness
t
mm
Mark
Heat Treatment or Condition
Tensile Strength
σb
Mpa
Yield Point
σs
Mpa
Elongation or Extension Rate
δ
%
Hardness
HBW
Pipe; wall thickness as per agreement 2.0265.08 Extrusion or Hot Forged Tubes P (.08) No specification No specification No specification No specification
Pipes; t<10 2.0265.10 Soft F28 (.10) 280~350 ≤180 ≥50 ≈70
Pipes; t<10 2.0265.26 Half-Hard F35 (.26) 350~420 ≥200 ≥28 ≈110
Pipes; t<5 2.0265.30 Hard F42(.30) ≥420 ≥320 ≥13 ≈130
1 Approximate Comparison Table Brass
China Japan United States International Organization for Standardization Germany European Standard Russia
GB JIS ASTM UNS ISO Numerical Grade DIN EN/DIN W-Nr. EN Numerical Grade GOST
H70 C2600 70Cu-30Zn C26000 CuZn30 C26000 CuZn30 C26000
2.0265
CuZn30 CW505L Л70
2 Approximate Comparison Table Copper and Copper Alloy
Japan United States International Organization for Standardization Germany France European Standard Russia Sweden United Kingdom
JIS UNS ISO DIN EN/DIN W-Nr. NF EN/NF EN Numerical Grade GOST SS BS EN/BS
C2600 C26000 CuZn30 CuZn30 2.0265 CuZn30 CuZn30 CW505L L70 CuZn30 CZ106

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!