中文版
Home Material NF EN 10269-1999
简体 | 繁體
Grade X3CrNiCu18-9-4
1.4567
Corresponding Standard NF EN 10269-1999
Classification Austenitic Stainless Steel
Density 7.9 g/cm3
X3CrNiCu18-9-4 Chemical Element Composition Content (%)
Component C Si Mn P S ① Cr Ni Cu N
Minimum Value - - - - - 17 8.5 3 -
Maximum Value 0.04 1 2 0.045 0.03 19 10.5 4 0.11
X3CrNiCu18-9-4 Mechanical Properties
diameter
d
mm		 Heat Treatment or Condition
Tensile Strength
σb
Mpa 		Yield Point
σs
Mpa 		Elongation or Extension Rate
δ
% 		Impact Energy Absorption
KV2
J
d≤160 +AT 450~650 ≥175 ≥45 ≥100
d≤35 C700 700~850 ≥350 ≥20 ≥80
X3CrNiCu18-9-4 Corresponding Standards(Same grade name, different standards)
1 EN 10088-1-2005
X3CrNiCu 18-9-4 1.4567
2 EN 10263-5-2001
X3CrNiCu18-9-4 1.4567
3 EN 10269-2006
X3CrNiCu18-9-4 1.4567
4 ISO TS 15510-2003
X3CrNiCu18-9-4
5 EN 10088-3-2005
X3CrNiCu18-9-4 1.4567
6 EN 10269-2013
X3CrNiCu 18-9-4 1.4567
7 EN 10088-3-2014
X3CrNiCu18-9-4 1.4567
8 ISO 15510-2014
X3CrNiCu18-9-4 4567-304-30-I
9 NF EN 10269-1999
X3CrNiCu18-9-4 1.4567
10 DIN EN 10263-5-2018
X3CrNiCu18-9-4 1.4567
11 DIN EN 10269-2014
X3CrNiCu 18-9-4 1.4567
12 DIN EN 10088-3-2014
X3CrNiCu18-9-4 1.4567
13 ISO 4954-2018
X3CrNiCu18-9-4 4567-304-30-I
14 NF EN 10088-1-2005
X3CrNiCu18-9-4 1.4567
15 EN 10263-5-2017
X3CrNiCu18-9-4 1.4567
16 ISO 4954-2-2024
X3CrNiCu18-9-4 4567-304-30-I

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!