X10CrNiMoMnNbVB15-10-1 1.4982 - NF EN 10269-1999

Grade	X10CrNiMoMnNbVB15-10-1
	1.4982
Corresponding Standard	NF EN 10269-1999 Steels and Nickel Alloys for Fasteners with Specified Elevated and/or Low Temperature Properties
Classification	Austenitic Stainless Steel
Density	7.95 g/cm³

X10CrNiMoMnNbVB15-10-1 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	Mo	N	V	Nb	B
Minimum Value	0.07	-	5.5	-	-	14	9	0.8	-	0.15	0.75	0.003
Maximum Value	0.13	1	7	0.04	0.03	16	11	1.2	0.11	0.4	1.25	0.009

X10CrNiMoMnNbVB15-10-1 Mechanical Properties

diameter d mm	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Impact Energy Absorption KV2 J
d≤100	+AT+WW	650~850	≥510	≥25	≥50

X10CrNiMoMnNbVB15-10-1 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!