Grade CuZn36Pb1.5
Germany W-Nr. 2.0331
Old Grade
Corresponding Standard DIN 17671-1-1983
Wrought copper and copper alloys tube;Properties.
Classification Copper and Copper Alloys
Density 8.5 g/cm3
CuZn36Pb1.5 Chemical Element Composition Content (%)
Component Fe Ni Cu Pb Al Sn Other Total More
Minimum Value - - 62 0.7 - - - Zn:余量
Maximum Value 0.2 0.3 64 2.5 0.05 0.1 0.1
"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.
CuZn36Pb1.5 Mechanical Properties
thickness
t
mm
Mark
Heat Treatment or Condition
Tensile Strength
σb
Mpa
Yield Point
σs
Mpa
Elongation or Extension Rate
δ
%
Hardness
HBW
Pipe; wall thickness as per agreement 2.0331.08 Extrusion or Hot Forged Tubes P (.08) No specification No specification No specification No specification
Pipes; t<10 2.0331.10 Soft F29 (.10) 290~370 ≤180 ≥50 ≈70
Pipes; t<10 2.0331.26 Half Hard F37 (.26) 370~440 ≥200 ≥27 ≈110
Pipes; t<5 2.0331.30 Hard F44 (.30) 440~540 ≥340 ≥12 ≈135
Pipes; t<2 2.0331.32 Tough-Hard F54 (.32) ≥540 ≥470 ≥6 ≈160
1 Approximate Comparison Table brass
China United States International Organization for Standardization Germany Russia United Kingdom
GB ISC ASTM UNS ISO Numerical Grade DIN EN/DIN W-Nr. GOST Commercial Grade BS EN/BS
HPb62-2 C35300 62Cu-36Zn-2Pb C35300 CuZn36Pb2 C35300 CuZn36Pb2 C35300
2.0331
ЛС62-2 CZ119 C35300
2 Approximate Comparison Table Cupper and cupper alloy
Japan United States International Organization for Standardization Germany France European Standard Russia United Kingdom
JIS UNS ISO DIN EN/DIN W-Nr. NF EN/NF EN Numerical Grade GOST BS EN/BS
C3501 C34000 CuZn35Pb1 CuZn36Pb1.5 2.0331 CuZn35Pb2 CuZn35Pb1 CW600N LS63-3 CZ118
CuZn36Pb1.5 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!