Grade CuZn36Pb3
Germany W-Nr. 2.0375
Corresponding Standard DIN 17671-1-1983
Wrought copper and copper alloys tube;Properties.
Classification Copper and Copper Alloys
Density 8.5 g/cm3
CuZn36Pb3 Chemical Element Composition Content (%)
Component Fe Ni Cu Pb Al Sn Other Total More
Minimum Value - - 60 2.5 - - - Zn:余量
Maximum Value 0.3 0.3 62 3.5 0.05 0.2 0.2
"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.
CuZn36Pb3 Mechanical Properties
thickness
t
mm
Mark
Heat Treatment or Condition
Tensile Strength
σb
Mpa
Yield Point
σs
Mpa
Elongation or Extension Rate
δ
%
Hardness
HBW
Pipe; wall thickness as per agreement 2.0375.08 Extrusion or Hot Forged Tubes P (.08) No specification No specification No specification No specification
Pipes; t<10 2.0375.10 Soft F34 (.10) ≥340 ≤210 ≥40 ≈80
Pipes; t<10 2.0375.26 Half-Hard F40 (.26) ≥400 ≥210 ≥18 ≈110
Pipes; t<5 2.0375.30 Hard F46 (.30) ≥460 ≥330 ≥10 ≈135
1 Approximate Comparison Table brass
China United States International Organization for Standardization Germany European Standard Russia United Kingdom
GB ISC ASTM UNS ISO Numerical Grade DIN EN/DIN W-Nr. EN Numerical Grade GOST Commercial Grade BS EN/BS
HPb62-3 C36000 62Cu-35Zn-3Pb C36000 CuZn36Pb3 C36000 CuZn36Pb3 C36000
2.0375
CuZn36Pb3 CW603N ЛС62-3 CZ124 C36000
2 Approximate Comparison Table Cupper and cupper alloy
Germany European Standard
DIN EN/DIN W-Nr. EN Numerical Grade
CuZn36Pb3 2.0375 CuZn36Pb3 CW603N

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!