中文版
Home Material NF EN 10269-1999
简体 | 繁體
Grade X3CrNiMoBN17-13-3
1.4910
Corresponding Standard NF EN 10269-1999
Classification Austenitic Stainless Steel
Density 8 g/cm3
X3CrNiMoBN17-13-3 Chemical Element Composition Content (%)
Component C Si Mn P S Cr Ni Mo N B
Minimum Value - - - - - 16 12 2 0.1 0.0015
Maximum Value 0.04 0.75 2 0.035 0.015 18 14 3 0.18 0.005
X3CrNiMoBN17-13-3 Mechanical Properties
diameter
d
mm		 Heat Treatment or Condition
Tensile Strength
σb
Mpa 		Yield Point
σs
Mpa 		Elongation or Extension Rate
δ
% 		Impact Energy Absorption
KV2
J
d≤160 +AT 550~750 ≥260 ≥35 ≥100
X3CrNiMoBN17-13-3 Corresponding Standards(Same grade name, different standards)
1 EN 10088-1-2005
X3CrNiMoBN 17-13-3 1.4910
2 EN 10269-2006
X3CrNiMoBN17-13-3 1.4910
3 EN 10302-2008
X3CrNiMoBN 17-13-3 1.4910
4 EN 10269-2013
X3CrNiMoBN 17-13-3 1.4910
5 ISO 15510-2014
X3CrNiMoBN17-13-3 4910-316-77-E
6 NF EN 10269-1999
X3CrNiMoBN17-13-3 1.4910
7 DIN EN 10269-2014
X3CrNiMoBN 17-13-3 1.4910
8 ISO 9328-7-2018
X3CrNiMoBN17-13-3
9 NF EN 10088-1-2005
X3CrNiMoBN17-13-3 1.4910
10 NF EN 10028-7-2008
X3CrNiMoBN17-13-3 1.4910
11 NF EN 10028-7-2000
X3CrNiMoBN17-13-3 1.4910

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!