Grade CuNi30Mn1Fe
Germany W-Nr. 2.0882
Old Grade
Corresponding Standard DIN 17671-1-1983
Wrought copper and copper alloys tube;Properties.
Classification Copper and Copper Alloys
Properties Corrosion Resistance
Density 8.9 g/cm3
CuNi30Mn1Fe Chemical Element Composition Content (%)
Component Fe C Mn S Ni * Pb Zn Other Total More
Minimum Value 0.4 - 0.5 - 30 - - - Cu:余量
Maximum Value 1 0.05 1.5 0.05 32 0.03 0.5 0.3
"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.
CuNi30Mn1Fe Mechanical Properties
thickness
t
mm
Mark
Heat Treatment or Condition
Tensile Strength
σb
Mpa
Yield Point
σs
Mpa
Elongation or Extension Rate
δ
%
Hardness
HBW
Pipe; wall thickness as per agreement 2.0882.08 Extrusion or Hot Forging P (.08) No specification No specification No specification No specification
Pipes; t<5 2.0882.10 Soft F36 (.10) 360~490 ≥120 ≥30 ≈100
1 Approximate Comparison Table Wrought Cupronickel
China United States International Organization for Standardization Germany European Standard Russia Sweden
GB ISC ASTM UNS ISO Numerical Grade DIN EN/DIN W-Nr. EN Numerical Grade GOST SS
BFe30-1-1 T71510 68Cu-30Ni-1Mn-.5Fe C71581 CuNi30Fe1Mn C71581 CuNi30Fe1Mn C71581
2.0882
CuNi30Fe1Mn CW354H МНЖМц30-1-1 5682
C71581
2 Approximate Comparison Table Copper and Copper Alloy
Germany European Standard
DIN EN/DIN W-Nr. EN Numerical Grade
CuNi30Mn1Fe 2.0882 CuNi30Mn1Fe CW354H

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!