CuPb1P 2.1160 - DIN 17671-1-1983

Grade	CuPb1P
Germany W-Nr.	2.1160
Corresponding Standard	DIN 17671-1-1983 Wrought copper and copper alloys tube；Properties.
Classification	Copper and Copper Alloys
Density	8.9 g/cm³

CuPb1P Chemical Element Composition Content (%)

Component	P	Pb	Other Total	More
Minimum Value	0.003	0.7	-	Cu:余量
Maximum Value	0.012	1.5	0.1	Cu:余量

"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.

CuPb1P Mechanical Properties

thickness t mm	Mark	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
Pipe; wall thickness as per agreement	2.1160.08	Extrusion or Hot Forging P (.08)	No specification	No specification	No specification	No specification
Pipes; 4≤t＜12	2.1160.26	Half Hard F26 (.26)	≥260	≥200	≥8	≈85

Approximate Comparison Table Cupper and cupper alloy

Germany		European Standard
DIN EN/DIN	W-Nr.	EN	Numerical Grade
CuPb1P	2.1160	CuPb1P	CW113C

CuPb1P Corresponding Standards(Same grade name, different standards)

1	DIN 17672-1-1983
	CuPb1P 2.1160
2	DIN 17671-1-1983
	CuPb1P 2.1160
3	DIN 17666-1983
	CuPb1P 2.1160

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!