中文版
Home Material EN 10250-4-1999
简体 | 繁體
Grade X5CrNiCuNb 16-4
European Standard Steel Grade 1.4542
Corresponding Standard EN 10250-4-1999
Open die steel forgings for general engineering purposes - Part 4: Stainless steels
Classification Precipitation-Hardening Stainless Steel
Properties Corrosion Resistance
X5CrNiCuNb 16-4 Chemical Element Composition Content (%)
Component C Si Mn P S * Cr Ni Cu Mo More
Minimum Value - - - - - 15 3 3 - Nb:5C~0.45
Maximum Value 0.07 0.7 1.5 0.04 0.03 17 5 5 0.6
X5CrNiCuNb 16-4 Mechanical Properties
thickness
t
mm		 Heat Treatment or Condition
Tensile Strength
σb
Mpa 		Yield Point
σs
Mpa 		Elongation or Extension Rate
δ
% 		Hardness
HBW 		Impact Energy Absorption
KV2
J
- A ≤1200 - - ≤360 -
t≤250* P930 ≥930 ≥720 ≥15 - ≥40
t≤250** P930 ≥930 ≥720 ≥12 - ≥30
t≤250* P1070 ≥1070 ≥1000 ≥12 - ≥20
t≤250** P1070 ≥1070 ≥1000 ≥10 - ≥15
t≤250* P1300 ≥1300 ≥1150 ≥8 - -
t≤250** P1300 ≥1300 ≥1150 ≥6 - -
1 Approximate Comparison Table Precipitation Hardening Stainless Steel
China Taiwan, China Japan South Korea United States International Organization for Standardization Germany France European Standard
GB ISC CNS JIS KS ASTM UNS ISO Numerical Grade DIN EN/DIN W-Nr. NF EN/NF EN Numerical Grade
05Cr17Ni4Cu4Nb
(0Cr17Ni4Cu4Nb) 		S51740 630 SUS 630 STS 630 630 S17400 X5CrNiCuNb 16-4
1
(ISO 683-13-1986) 		4542-174-00-I X5CrNiCuNb 17-4 1.4542 Z6CNU 17-04 X5CrNiCuNb 16-4 1.4542
2 Approximate Comparison Table Precipitation Hardening Heat-Resistant Steel
China Taiwan, China Japan South Korea United States International Organization for Standardization Germany France European Standard
GB ISC CNS JIS KS ASTM UNS ISO DIN EN/DIN W-Nr. NF EN/NF EN Numerical Grade
05Cr17Ni4Cu4Nb
(0Cr17Ni4Cu4Nb) 		S51740 630 SUS 630 STS 630 630 S17400 X5CrNiCuNb 16-4 X5CrNiCuNb 17-4 1.4542 Z6CNU 17-04 X5CrNiCuNb 16-4 1.4542
X5CrNiCuNb16-4 Corresponding Standards(Same grade name, different standards)
1 EN 10088-1-2005
X5CrNiCuNb 16-4 1.4542
2 EN 10250-4-1999
X5CrNiCuNb 16-4 1.4542
3 ISO TS 15510-2003
X5CrNiCuNb16-4
4 EN 10088-3-2005
X5CrNiCuNb 16-4 1.4542
5 EN 10088-3-2014
X5CrNiCuNb 16-4 1.4542
6 ISO 15510-2014
X5CrNiCuNb16-4 4542-174-00-I
7 DIN EN 10088-3-2014
X5CrNiCuNb 16-4 1.4542
8 ISO 683-18-2014
X5CrNiCuNb16-4 4542-174-00-1
9 NF EN 10088-2-2005
X5CrNiCuNb16-4 1.4542
10 NF EN 10088-1-2005
X5CrNiCuNb16-4 1.4542

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!