X6Cr17 1.4016 - NF EN 10088-2-2005

Grade	X6Cr17
	1.4016
Corresponding Standard	NF EN 10088-2-2005 Part2:Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
Classification	Ferritic Stainless Steel

X6Cr17 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S ^①	Cr
Minimum Value	-	-	-	-	-	16
Maximum Value	0.08	1	1	0.04	0.015	18

◎ Elements not listed in this table shall not be intentionally added to the steel without the agreement of the purchaser except for finishing the cast. All appropriate precautions are to be taken to avoid the addition of such elements from scrap and other materials used in production which would impair mechanical properties and the suitability of the steel.

X6Cr17 Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %
Cold rolled strip steel: T ≤ 8mm	+A	450~600	l：≥260；t：≥280	≥ 20①
Hot rolled strip steel: T ≤ 13.5mm	+A	450~600	l：≥240；t：≥260	≥ 18①
Hot-rolled medium-thick plate: T ≤ 25mm	+A	430~630	l：≥240；t：≥260	≥ 20①
Steel (Process Flow 2H):	Cold processing + C700 ③④	700~850
Steel (Process Flow 2H):	Cold processing + C850 ③④	850~1000
Steel (Process Flow 2H):	Cold processing + CP350 ③④		350~500
Steel (Process Flow 2H):	Cold processing + CP500 ③④		500~700

◎ T-thickness；l-longitudinal；t-trasverse
◎ +A=soft annealed；+QT=quenched and tempered；+P=precipitation hardened；+AT=solutiong annealed；+SR=strength relieved

X6Cr17 Corresponding Standards(Same grade name, different standards)

1	EN 10088-1-2005
	X6Cr 17 1.4016
2	ISO 4955-2005
	X6Cr17 (4)
3	EN 10296-2-2005
	X6Cr17 1.4016
4	EN 10263-5-2001
	X6Cr17 1.4016
5	EN 10250-4-1999
	X6Cr 17 1.4016
6	ISO TS 15510-2003
	X6Cr17
7	EN 10088-2-2005
	X6Cr 17 1.4016
8	DIN 17440-1972
	X6Cr 17 X8Cr 17 1.4016
9	EN 10088-3-2005
	X6Cr17 1.4016
10	EN 10088-3-2014
	X6Cr17 1.4016
11	ISO 15510-2014
	X6Cr17 4016-430-00-I
12	DIN EN 10263-5-2018
	X6Cr17 1.4016
13	DIN EN 10088-3-2014
	X6Cr17 1.4016
14	ISO 683-18-2014
	X6Cr17 4016-430-00-I
15	ISO 4955-2016
	X6Cr17 4016-430-00-I (4)
16	ISO 4954-2018
	X6Cr17 4016-430-00-I
17	NF EN 10088-2-2005
	X6Cr17 1.4016
18	NF EN 10088-1-2005
	X6Cr17 1.4016
19	NF EN 10296-2-2005
	X6Cr17 1.4016
20	EN 10263-5-2017
	X6Cr17 1.4016
21	DIN EN 10151-2002
	X6Cr17 1.4016
22	ISO 4954-2-2024
	X6Cr17 4016-430-00-I
23	DIN EN 10296-2-2006
	X6Cr17 1.4016

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!