X2CrTi17 1.4520 - NF EN 10088-2-2005

Grade	X2CrTi17
	1.4520
Corresponding Standard	NF EN 10088-2-2005 Part2:Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
Classification	Ferritic Stainless Steel

X2CrTi17 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	N	Ti
Minimum Value	-	-	-	-	-	16	-	0.3
Maximum Value	0.025	0.5	0.5	0.04	0.015	18	0.015	0.6

◎ Elements not listed in this table shall not be intentionally added to the steel without the agreement of the purchaser except for finishing the cast. All appropriate precautions are to be taken to avoid the addition of such elements from scrap and other materials used in production which would impair mechanical properties and the suitability of the steel.

X2CrTi17 Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %
Cold rolled strip steel: T ≤ 8mm	+A	380~530	l：≥180；t：≥200	≥ 24①

◎ T-thickness；l-longitudinal；t-trasverse
◎ +A=soft annealed；+QT=quenched and tempered；+P=precipitation hardened；+AT=solutiong annealed；+SR=strength relieved

X2CrTi17 Corresponding Standards(Same grade name, different standards)

1	EN 10088-1-2005
	X2CrTi 17 1.4520
2	EN 10088-3-2014
	X2CrTi 17 1.4520
3	ISO 15510-2014
	X2CrTi17 4520-430-70-I
4	ISO 9328-7-2018
	X2CrTi17
5	DIN EN 10088-3-2014
	X2CrTi 17 1.4520
6	NF EN 10088-2-2005
	X2CrTi17 1.4520
7	NF EN 10088-1-2005
	X2CrTi17 1.4520
8	NF EN 10028-7-2008
	X2CrTi17 1.4520
9	NF EN 10028-7-2000
	X2CrTi17 1.4520

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!