X10CrNi18-8 1.4310 - NF EN 10088-2-2005

Grade	X10CrNi18-8
	1.4310
Corresponding Standard	NF EN 10088-2-2005 Part2:Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
Classification	Austenitic Stainless Steel

X10CrNi18-8 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	Mo	N
Minimum Value	0.05	-	-	-	-	16	6	-	-
Maximum Value	0.15	2	2	0.045	0.015	19	9.5	0.8	0.11

◎ Elements not listed in this table shall not be intentionally added to the steel without the agreement of the purchaser except for finishing the cast. All appropriate precautions are to be taken to avoid the addition of such elements from scrap and other materials used in production which would impair mechanical properties and the suitability of the steel.

X10CrNi18-8 Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %
Cold rolled strip steel: T ≤ 8mm	+AT	600~950	( t ) Rp0.2：≥ 250①③ Rp1.0：≥ 280①② ③	( t ) T＜3mm：≥40③④ T ≥ 3mm：≥40③⑤
Steel (Process Flow 2H):	Cold work + C700⑥⑦	700~850
Steel (Process Flow 2H):	Cold working + C850⑥⑦	850~1000
Steel (Process Flow 2H):	Cold working + C1000⑥⑦	1000~1150
Steel (Process Flow 2H):	Cold work + C1150⑥⑦	1150~1300
Steel (Process Flow 2H):	Cold processing + C1300⑥⑦	1300~1500
Steel (Process Flow 2H):	Cold working + CP500⑥⑦		500~700
Steel (Process Flow 2H):	Cold working + CP700⑥⑦		700~900
Steel (Process Flow 2H):	Cold work + CP900⑥⑦		900~1100
Steel (Process Flow 2H):	Cold work + CP1100⑥⑦		1100~1300

◎ T-thickness；l-longitudinal；t-trasverse
◎ +A=soft annealed；+QT=quenched and tempered；+P=precipitation hardened；+AT=solutiong annealed；+SR=strength relieved

X10CrNi18-8 Corresponding Standards(Same grade name, different standards)

1	EN 10088-1-2005
	X10CrNi 18-8 1.4310
2	EN 10263-5-2001
	X10CrNi18-8 1.4310
3	ISO TS 15510-2003
	X10CrNi18-8
4	EN 10088-3-2005
	X10CrNi 18-8 1.4310
5	EN 10088-3-2014
	X10CrNi 18-8 1.4310
6	ISO 15510-2014
	X10CrNi18-8 4310-301-00-I
7	DIN EN 10263-5-2018
	X10CrNi18-8 1.4310
8	DIN EN 10088-3-2014
	X10CrNi 18-8 1.4310
9	DIN EN 10270-3-2012
	X10CrNi18-8 1.4310
10	ISO 4954-2018
	X10CrNi18-8 4310-301-00-I
11	NF EN 10088-2-2005
	X10CrNi18-8 1.4310
12	NF EN 10088-1-2005
	X10CrNi18-8 1.4310
13	EN 10263-5-2017
	X10CrNi18-8 1.4310
14	DIN EN 10151-2002
	X10CrNi18-8 1.4310
15	ISO 4954-2-2024
	X10CrNi18-8 4310-301-00-I

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!