中文版
Home Material NF EN 10088-2-2005
简体 | 繁體
Grade X5CrNi18-10
1.4301
Corresponding Standard NF EN 10088-2-2005
Part2:Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
Classification Austenitic Stainless Steel
X5CrNi18-10 Chemical Element Composition Content (%)
Component C Si Mn P S ① Cr Ni N
Minimum Value - - - - - 17.5 8 -
Maximum Value 0.07 1 2 0.045 0.015 19.5 10.5 0.11
◎ Elements not listed in this table shall not be intentionally added to the steel without the agreement of the purchaser except for finishing the cast. All appropriate precautions are to be taken to avoid the addition of such elements from scrap and other materials used in production which would impair mechanical properties and the suitability of the steel.
X5CrNi18-10 Mechanical Properties
condition Heat Treatment or Condition
Tensile Strength
σb
Mpa 		Yield Point
σs
Mpa 		Elongation or Extension Rate
δ
% 		Impact Energy Absorption
KV2
J
Cold rolled strip steel: T ≤ 8mm +AT 540~750 ( t )
Rp0.2：≥ 230①③
Rp1.0：≥ 260①②
③		 ( t )
T＜3mm：≥45③④
⑥
T ≥ 3mm：≥45③⑤
⑥		 -
Hot rolled strip steel: T ≤ 13.5mm +AT 520~720 ( t )
Rp0.2：≥ 210①③
Rp1.0：≥ 250①②
③		 ( t )
T＜3mm：≥45③④
⑥
T ≥ 3mm：≥45③⑤
⑥		 （T＞10mm）
I：≥ 100；t：≥60
Hot Rolled Medium Thickness Plate: T ≤ 75mm +AT 520~720 ( t )
Rp0.2：≥ 210①③
Rp1.0：≥ 250①②
③		 ( t )
T＜3mm：≥45③④
T ≥ 3mm：≥45③⑤		 （T＞10mm）
I：≥ 100；t：≥60
Steel (Process Flow 2H): Cold processing + C700⑧⑨ 700~850
Steel (Process Flow 2H): Cold processing + C850⑧⑨ 850~1000
Steel (Process Flow 2H): Cold processing + C1000⑧⑨ 1000~1150
Steel (Process Flow 2H): Cold processing + C1150⑧⑨ 1150~1300
Steel (Process Flow 2H): Cold processing + C1300⑧⑨ 1300~1500
Steel (Process Flow 2H): Cold processing + CP350⑧⑨ 350~500
Steel (Process Flow 2H): Cold processing + CP500⑧⑨ 500~700
Steel (Process Flow 2H): Cold processing + CP700⑧⑨ 700~900
Steel (Process Flow 2H): Cold processing + CP900⑧⑨ 900~1100
Steel (Process Flow 2H): Cold processing + CP1100⑧⑨ 1100~1300
◎ T-thickness；l-longitudinal；t-trasverse
◎ +A=soft annealed；+QT=quenched and tempered；+P=precipitation hardened；+AT=solutiong annealed；+SR=strength relieved
Approximate Comparison Table
China Japan United States Germany France European Standard Russia Sweden United Kingdom
GB JIS ASTM DIN EN/DIN W-Nr. NF EN/NF EN Numerical Grade GOST SS BS EN/BS
0Cr18Ni9 SUS304 304
304N 		X5CrNi18-10
X5CrNi18-9 		1.4301 X5CrNi18-10
Z5CN18-09
Z6CN18-09
Z7CN18-09 		X5CrNi18-10 1.4301 08KH18N10 2333
2333-02 		304S15
304S31
X5CrNi18-10 Corresponding Standards(Same grade name, different standards)
1 EN 10088-1-2005
X5CrNi 18-10 1.4301
2 EN 10296-2-2005
X5CrNi18-10 1.4301
3 EN 10253-4-2003
X5CrNi18-10 1.4301
4 EN 10263-5-2001
X5CrNi18-10 1.4301
5 EN 10269-2006
X5CrNi18-10 1.4301
6 EN 10250-4-1999
X5CrNi 18-10 1.4301
7 EN 10088-2-2005
X5CrNi 18-10 1.4301
8 DIN 17440-1972
X5CrNi 18-10 X5CrNi 18-9 1.4301
9 EN 10088-3-2005
X5CrNi18-10 1.4301
10 EN 10269-2013
X5CrNi 18-10 1.4301
11 EN 10088-3-2014
X5CrNi18-10 1.4301
12 ISO 15510-2014
X5CrNi18-10 4301-304-00-I
13 NF EN 10269-1999
X5CrNi18-10 1.4301
14 VDI 2230-1-2015
X5CrNi 18-10 1.4301
15 DIN EN 10263-5-2018
X5CrNi18-10 1.4301
16 DIN EN 10269-2014
X5CrNi 18-10 1.4301
17 ISO 9328-7-2018
X5CrNi18-10
18 DIN EN 10088-3-2014
X5CrNi18-10 1.4301
19 DIN EN 10270-3-2012
X5CrNi18-10 1.4301
20 ISO 683-18-2014
X5CrNi18-10 4301-304-00-I
21 ISO 4954-2018
X5CrNi18-10 4301-304-00-I
22 NF EN 10088-2-2005
X5CrNi18-10 1.4301
23 NF EN 10088-1-2005
X5CrNi18-10 1.4301
24 NF EN 10028-7-2008
X5CrNi18-10 1.4301
25 NF EN 10296-2-2005
X5CrNi18-10 1.4301
26 NF EN 10028-7-2000
X5CrNi18-10 1.4301
27 EN 10263-5-2017
X5CrNi18-10 1.4301
28 DIN EN 10151-2002
X5CrNi18-10 1.4301
29 ISO 4954-2-2024
X5CrNi18-10 4301-304-00-I
30 DIN EN 10296-2-2006
X5CrNi18-10 1.4301

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!