X5CrNiMo17-12-2 1.4401 - NF EN 10088-2-2005

Grade	X5CrNiMo17-12-2
	1.4401
Corresponding Standard	NF EN 10088-2-2005 Part2:Technical Delivery Conditions for Sheet/Plate and Strip of Corrosion Resisting Steels for General Purposes
Classification	Austenitic Stainless Steel

X5CrNiMo17-12-2 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S ^①	Cr	Ni	Mo	N
Minimum Value	-	-	-	-	-	16.5	10	2	-
Maximum Value	0.07	1	2	0.045	0.015	18.5	13	2.5	0.11

◎ Elements not listed in this table shall not be intentionally added to the steel without the agreement of the purchaser except for finishing the cast. All appropriate precautions are to be taken to avoid the addition of such elements from scrap and other materials used in production which would impair mechanical properties and the suitability of the steel.

X5CrNiMo17-12-2 Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Impact Energy Absorption KV2 J
Cold rolled strip steel: T ≤ 8mm	+AT	530~680	( t ) Rp0.2：≥ 240①③ Rp1.0：≥ 270①② ③	( t ) T＜3mm：≥40③④ T ≥ 3mm：≥40③⑤	-
Hot rolled strip steel: T ≤ 13.5mm	+AT	530~680	( t ) Rp0.2：≥ 220①③ Rp1.0：≥ 260①② ③	( t ) T＜3mm：≥40③④ T ≥ 3mm：≥40③⑤	（T＞10mm） I：≥ 100；t：≥60
Hot rolled medium and thick plates: T ≤ 75mm	+AT	520~670	( t ) Rp0.2：≥ 220①③ Rp1.0：≥ 260①② ③	( t ) T＜3mm：≥45③④ T ≥ 3mm：≥45③⑤	（T＞10mm） I：≥ 100；t：≥60
Steel (Process Flow 2H):	Cold Work + C700⑦⑧	700~850
Steel (Process Flow 2H):	Cold processing + C850⑦⑧⑨	850~1000
Steel (Process Flow 2H):	Cold Work + CP350⑦⑧		350~500
Steel (Process Flow 2H):	Cold processing + CP500⑦⑧⑨		500~700

◎ T-thickness；l-longitudinal；t-trasverse
◎ +A=soft annealed；+QT=quenched and tempered；+P=precipitation hardened；+AT=solutiong annealed；+SR=strength relieved

X5CrNiMo17-12-2 Corresponding Standards(Same grade name, different standards)

1	EN 10088-1-2005
	X5CrNiMo 17-12-2 1.4401
2	EN 10296-2-2005
	X5CrNiMo17-12-2 1.4401
3	EN 10253-4-2003
	X5CrNiMo17-12-2 1.4401
4	EN 10263-5-2001
	X5CrNiMo17-12-2 1.4401
5	EN 10269-2006
	X5CrNiMo17-12-2 1.4401
6	EN 10250-4-1999
	X5CrNiMo 17-12-2 1.4401
7	ISO TS 15510-2003
	X5CrNiMo17-12-2
8	EN 10088-2-2005
	X5CrNiMo17-12-2 1.4401
9	DIN 17440-1972
	X5CrNiMo 17-12-2 X5CrNiMo 18-10 1.4401
10	EN 10088-3-2005
	X5CrNiMo17-12-2 1.4401
11	EN 10269-2013
	X5CrNiMo 17-12-2 1.4401
12	EN 10088-3-2014
	X5CrNiMo17-12-2 1.4401
13	ISO 15510-2014
	X5CrNiMo17-12-2 4401-316-00-I
14	NF EN 10269-1999
	X5CrNiMo17-12-2 1.4401
15	VDI 2230-1-2015
	X5CrNiMo 17-12-2 1.4401
16	DIN EN 10263-5-2018
	X5CrNiMo 17-12-2 1.4401
17	DIN EN 10269-2014
	X5CrNiMo 17-12-2 1.4401
18	ISO 9328-7-2018
	X5CrNiMo17-12-2
19	DIN EN 10088-3-2014
	X5CrNiMo17-12-2 1.4401
20	DIN EN 10270-3-2012
	X5CrNiMo17-12-2 1.4401
21	ISO 683-18-2014
	X5CrNiMo17-12-2 4401-316-00-I
22	ISO 4954-2018
	X5CrNiMo17-12-2 4401-316-00-I
23	NF EN 10088-2-2005
	X5CrNiMo17-12-2 1.4401
24	NF EN 10088-1-2005
	X5CrNiMo17-12-2 1.4401
25	NF EN 10028-7-2008
	X5CrNiMo17-12-2 1.4401
26	NF EN 10296-2-2005
	X5CrNiMo17-12-2 1.4401
27	NF EN 10028-7-2000
	X5CrNiMo17-12-2 1.4401
28	EN 10263-5-2017
	X5CrNiMo 17-12-2 1.4401 SS316
29	DIN EN 10151-2002
	X5CrNiMo17-12-2 1.4401
30	ISO 4954-2-2024
	X5CrNiMo17-12-2 4401-316-00-I
31	DIN EN 10296-2-2006
	X5CrNiMo17-12-2 1.4401
32	EN 10272-2016
	X5CrNiMo17-12-2 1.4401

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!