Grade CuZn15
Germany W-Nr. CW502L
Corresponding Standard DIN EN 12163-1998
Copper and copper alloys – Rod for general purposes
Classification Copper and Copper Alloys
Density 8.8 g/cm3
CuZn15 Chemical Element Composition Content (%)
Component Fe Ni Cu Pb Al Sn Other Total More
Minimum Value - - 84 - - - - Zn:余量
Maximum Value 0.05 0.3 86 0.05 0.02 0.1 0.1
"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.
CuZn15 Mechanical Properties
diameter/width across-flats
d
mm
Mark
Heat Treatment or Condition
Tensile Strength
σb
Mpa
Yield Point
σs
Mpa
Elongation or Extension Rate
δ
%
Hardness
HBW
4<d≤80 CuZn15-R290 R290 ≥290 ≈100* ≥20(A100),≥24(A11.3),≥27(A)
4<d≤80 CuZn15-H075 H075 HB: 75~105;HV: 80~110
4<d≤40 CuZn15-R350 R350 ≥350 ≈300* ≥8(A100),≥10(A11.3),≥12(A)
4<d≤40 CuZn15-H105 H105 HB: 105~135;HV: 110~140
4<d≤10 CuZn15-R430 R430 ≥430 ≈390*
4<d≤10 CuZn15-H130 H130 HB: ≥130;HV: ≥135
4<d≤80 CuZn15-M M No specification No specification No specification No specification
1 Approximate Comparison Table brass
China Japan United States International Organization for Standardization Germany European Standard Russia
GB JIS ASTM UNS ISO Numerical Grade DIN EN/DIN W-Nr. EN Numerical Grade GOST
H85 C2300 85Cu-15Zn C23000 CuZn15 C23000 CuZn15 C23000
2.0240
CuZn15 CW502L Л85
2 Approximate Comparison Table Cupper and cupper alloy
Germany European Standard Russia
DIN EN/DIN W-Nr. EN Numerical Grade GOST
CuZn15 2.0240 CuZn15 CW502L L85

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!