X11CrNiMnN19-8-6 1.4369 - NF EN 10088-2-2005

Grade	X11CrNiMnN19-8-6
	1.4369
Corresponding Standard	NF EN 10088-2-2005 Part2:Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
Classification	Austenitic Stainless Steel

X11CrNiMnN19-8-6 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	N
Minimum Value	0.07	0.5	5	-	-	17.5	6.5	0.2
Maximum Value	0.15	1	7.5	0.03	0.015	19.5	8.5	0.3

◎ Elements not listed in this table shall not be intentionally added to the steel without the agreement of the purchaser except for finishing the cast. All appropriate precautions are to be taken to avoid the addition of such elements from scrap and other materials used in production which would impair mechanical properties and the suitability of the steel.

X11CrNiMnN19-8-6 Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %
Cold Rolled Steel Strip: T ≤ 4mm	+AT	750~950	( t ) Rp0.2：≥ 340①③ Rp1.0：≥ 370①② ③	( t ) T＜3mm：≥35③④ T ≥ 3mm：≥35③⑤
Steel (Process Flow 2H):	Cold working + C850⑥⑦	850~1000
Steel (Process Flow 2H):	Cold working + C1000⑥⑦	1000~1150
Steel (Process Flow 2H):	Cold work + C1150⑥⑦	1150~1300
Steel (Process Flow 2H):	Cold processing + C1300⑥⑦⑧	1300~1500
Steel (Process Flow 2H):	Cold working + CP500⑥⑦		500~700
Steel (Process Flow 2H):	Cold working + CP700⑥⑦		700~900
Steel (Process Flow 2H):	Cold work + CP900⑥⑦		900~1100
Steel (Process Flow 2H):	Cold work + CP1100⑥⑦		1100~1300

◎ T-thickness；l-longitudinal；t-trasverse
◎ +A=soft annealed；+QT=quenched and tempered；+P=precipitation hardened；+AT=solutiong annealed；+SR=strength relieved

X11CrNiMnN19-8-6 Corresponding Standards(Same grade name, different standards)

1	EN 10088-1-2005
	X11CrNiMnN 19-8-6 1.4369
2	ISO TS 15510-2003
	X11CrNiMnN19-8-6
3	EN 10088-3-2014
	X11CrNiMnN 19-8-6 1.4369
4	ISO 15510-2014
	X11CrNiMnN19-8-6 4369-202-91-I
5	DIN EN 10088-3-2014
	X11CrNiMnN 19-8-6 1.4369
6	NF EN 10088-2-2005
	X11CrNiMnN19-8-6 1.4369
7	NF EN 10088-1-2005
	X11CrNiMnN19-8-6 1.4369
8	DIN EN 10151-2002
	X11CrNiMnN19-8-6 1.4369

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!