Grade CuZn40
Germany W-Nr. CW509L
Old Grade
Corresponding Standard DIN EN 12163-1998
Copper and copper alloys – Rod for general purposes
Classification Copper and Copper Alloys
Density 8.4 g/cm3
CuZn40 Chemical Element Composition Content (%)
Component Fe Ni Cu Pb Al Sn Other Total More
Minimum Value - - 59.5 - - - - Zn:余量
Maximum Value 0.2 0.3 61.5 0.3 0.05 0.2 0.2
"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.
CuZn40 Mechanical Properties
diameter/width across-flats
d
mm
Mark
Heat Treatment or Condition
Tensile Strength
σb
Mpa
Yield Point
σs
Mpa
Elongation or Extension Rate
δ
%
Hardness
HBW
2<d≤80 CuZn40-R340 R340 ≥340 ≈260* ≥18(A100),
≥20(A11.3),
≥25(A)
2<d≤80 CuZn40-H080 H080 HB: ≥80;
HV: ≥85
2<d≤80 CuZn40-M M No specification No specification No specification No specification
New and Old Grade Replacement List
1 Approximate Comparison Table Brass
China Japan United States International Organization for Standardization Germany European Standard Russia
GB ISC JIS ASTM UNS ISO Numerical Grade DIN EN/DIN W-Nr. EN Numerical Grade GOST
H59 T28200 C2800 60Cu-40Zn C28000 CuZn40 C28000 CuZn40 C28000
2.0360
CuZn40 CW509L Л60
2 Approximate Comparison Table Copper and Copper Alloy
Japan United States International Organization for Standardization Germany France European Standard Russia United Kingdom
JIS UNS ISO DIN EN/DIN W-Nr. NF EN/NF EN Numerical Grade GOST BS EN/BS
C2801 C28000 CuZn40 CuZn40 2.0360 CuZn40 CuZn40 CW509L L60 CZ109
3 Approximate Comparison Table Brass
China Japan United States Germany United Kingdom
GB JIS ASTM DIN EN/DIN BS EN/BS
H59 C2800 C28000 CuZn40 CZ109

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!