LC-Ni99.6 2.4061 - DIN 17752-2002

Grade	LC-Ni99.6
Germany W-Nr.	2.4061
Corresponding Standard	DIN 17752-2002 Wrought nickel and nickel alloy rod and bars Requirements and testing
Classification	Nickel and Nickel Alloys
Properties	Corrosion Resistance
Density	8.9 g/cm³

LC-Ni99.6 Chemical Element Composition Content (%)

Component	Fe	C	Si	Mn	S	Cu	Ti	Co	Mg	More
Minimum Value	-	-	-	-	-	-	-	-	-	Ni+Co≥99.6
Maximum Value	0.25	0.02	0.15	0.35	0.005	0.15	0.1	1	0.15	Ni+Co≥99.6

LC-Ni99.6 Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
Rods; 2≤d≤55	Softening annealing (F34)	≥340	≥80	≥40	≤130 HBW2.5/62.5
Bar stock; 2≤d≤50	1/2-Hard (F43)	≥430	≥150	≥15	≈150 HBW2.5/62.5

Approximate Comparison Table Corrosion-Resistant Alloy

LC-Ni99.6 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!