LC-NiCr15Fe 2.4817 - DIN 17752-2002

Grade	LC-NiCr15Fe
Germany W-Nr.	2.4817
Corresponding Standard	DIN 17752-2002 Wrought nickel and nickel alloy rod and bars Requirements and testing
Classification	Nickel and Nickel Alloys
Properties	Corrosion Resistance
Density	8.5 g/cm³

LC-NiCr15Fe Chemical Element Composition Content (%)

Component	Fe	C	Si	Mn	P	S	Cr	Ni	Cu	Ti	B	Co	Al
Minimum Value	6	-	-	-	-	-	14	72	-	-	-	-	-
Maximum Value	10	0.025	0.5	1	0.02	0.015	17	-	0.5	0.3	0.006	1.5	0.3

LC-NiCr15Fe Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
Bar; d≤100	Solution heat treatment (F50)	≥500	≥160	≥35	≤185 HBW2.5/62.5
Bars; d≤160	Soft annealing (F55)	≥550	≥170	≥30	≤195 HBW2.5/62.5

LC-NiCr15Fe Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!