NiCr23Fe 2.4851 - DIN 17752-2002

Grade	NiCr23Fe
Germany W-Nr.	2.4851
Corresponding Standard	DIN 17752-2002 Wrought nickel and nickel alloy rod and bars Requirements and testing
Classification	Nickel and Nickel Alloys
Properties	Corrosion Resistance
Density	8.2 g/cm³

NiCr23Fe Chemical Element Composition Content (%)

Component	Fe	C ^*	Si	Mn	P	S	Cr	Ni	Cu	Ti	B	Co	Al
Minimum Value	-	-	-	-	-	-	21	58	-	-	-	-	1
Maximum Value	18	0.1	0.5	1	0.02	0.015	25	63	0.5	0.5	0.006	1.5	1.7

NiCr23Fe Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
Bar; d≤100	Solution heat treatment (F55)	≥550	≥205	≥30	≤220 HBW2.5/62.5

Approximate Comparison Table corrosion-resistant alloy

NiCr23Fe Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!