NiCr20Ti 2.4951 - DIN 17752-2002

Grade	NiCr20Ti
Germany W-Nr.	2.4951
Corresponding Standard	DIN 17752-2002 Wrought nickel and nickel alloy rod and bars Requirements and testing
Classification	Nickel and Nickel Alloys
Properties	Corrosion Resistance
Density	8.4 g/cm³

NiCr20Ti Chemical Element Composition Content (%)

Component	Fe	C	Si	Mn	P	S	Cr	Cu	Ti	Co	Al	More
Minimum Value	-	0.08	-	-	-	-	18	-	0.2	-	-	Ni:余量
Maximum Value	5	0.15	1	1	0.02	0.015	21	0.5	0.6	5	0.3	Ni:余量

NiCr20Ti Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
Bar; d≤100	Solution heat treatment (F65)	≥650	≥240	≥25	≤230 HBW2.5/62.5

1 Approximate Comparison Table

2 Approximate Comparison Table

NiCr20Ti Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!