NiCu30Fe 2.4360 - DIN 17752-2002

Grade	NiCu30Fe
Germany W-Nr.	2.4360
Corresponding Standard	DIN 17752-2002 Wrought nickel and nickel alloy rod and bars Requirements and testing
Classification	Nickel and Nickel Alloys
Properties	Corrosion Resistance
Density	8.8 g/cm³

NiCu30Fe Chemical Element Composition Content (%)

Component	Fe	C	Si	Mn	S	Cu	Ti	Al	More
Minimum Value	1	-	-	-	-	28	-	-	Ni+Co≥63
Maximum Value	2.5	0.15	0.5	2	0.02	34	0.3	0.5	Ni+Co≥63

NiCu30Fe Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
Rods; 2≤d≤55	Soft annealing (F45)	≥450	≥180	≥35	≤150 HBW2.5/62.5
Bar stock; 2≤d≤50	1/2-Hard (F55)	≥550	≥300	≥25	≈170 HBW2.5/62.5
Bars; 2 ≤ d ≤ 35	Hard (F70)	≥700	≥650	≥3	≈225 HBW2.5/62.5

Approximate Comparison Table Corrosion-Resistant Alloy

NiCu30Fe Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!