NiCu30FeS 2.4363 - DIN 17752-2002

Grade	NiCu30FeS
Germany W-Nr.	2.4363
Corresponding Standard	DIN 17752-2002 Wrought nickel and nickel alloy rod and bars Requirements and testing
Classification	Nickel and Nickel Alloys
Properties	Corrosion Resistance
Density	8.8 g/cm³

NiCu30FeS Chemical Element Composition Content (%)

Component	Fe	C	Si	Mn	S	Cu	Ti	Co	Al	More
Minimum Value	-	-	-	-	0.025	28	-	-	-	Ni+Co:63~70
Maximum Value	2.5	0.3	0.5	2	0.06	34	0.3	1	0.5	Ni+Co:63~70

NiCu30FeS Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
Rods; 2≤d≤55	Soft annealing (F45)	≥450	≥180	≥35	≤150 HBW2.5/62.5

NiCu30FeS Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!