NiCr23Mo16Al 2.4605 - DIN 17752-2002

Grade	NiCr23Mo16Al
Germany W-Nr.	2.4605
Corresponding Standard	DIN 17752-2002 Wrought nickel and nickel alloy rod and bars Requirements and testing
Classification	Nickel and Nickel Alloys
Properties	Corrosion Resistance
Density	8.6 g/cm³

NiCr23Mo16Al Chemical Element Composition Content (%)

Component	Fe	C	Si	Mn	P	S	Cr	Cu	Mo	Co	Al	More
Minimum Value	-	-	-	-	-	-	22	-	15	-	0.1	Ni:余量
Maximum Value	1.5	0.01	0.1	0.5	0.025	0.015	24	0.5	16.5	0.3	0.4	Ni:余量

NiCr23Mo16Al Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
Bars; d≤160	Solution Heat Treatment (F69)	≥690	≥320	≥40	≤240 HBW2.5/62.5

Approximate Comparison Table Corrosion-Resistant Alloy

NiCr23Mo16Al Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!