NiCr21Mo16W 2.4606 - DIN 17752-2002

Grade	NiCr21Mo16W
Germany W-Nr.	2.4606
Corresponding Standard	DIN 17752-2002 Wrought nickel and nickel alloy rod and bars Requirements and testing
Classification	Nickel and Nickel Alloys
Properties	Corrosion Resistance
Density	8.7 g/cm³

NiCr21Mo16W Chemical Element Composition Content (%)

Component	Fe	C	Si	Mn	P	S	Cr	Mo	Ti	W	V	Co	Al	More
Minimum Value	-	-	-	-	-	-	19	15	0.02	3	-	-	-	Ni:余量
Maximum Value	2	0.01	0.08	0.75	0.025	0.015	23	17	0.25	4.4	0.2	1	0.5	Ni:余量

NiCr21Mo16W Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
Bars; d≤160	Solution Heat Treatment (F69)	≥690	≥310	≥45	≤240 HBW2.5/62.5

Approximate Comparison Table Corrosion-Resistant Alloy

NiCr21Mo16W Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!